Interphase Tech 5536 Network Card User Manual


 
Procedures
186 Interphase Corporation
Supply an IP
address from a
static address pool
to a remote user
1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Services tab.
3. From the services list, select Remote Access
Service, and then click Properties.
4. In the Remote Access Setup dialog box, click
Network.
5. In the Network Configuration dialog box, click the
TCP/IP Configure button.
6. In the RAS Server TCP/IP Configuration dialog
box, select the Use static address pool option.
7. Enter an IP pool address.
Using this method, the first IP address of the pool is
assigned to the server. For example, the following
figure shows IP addressing with address pool
192.1.1.1 to 192.1.1.30:
Figure F-3. IP Addressing
If you want to... Do this...
Remote Client 2
192.1.1.3
Remote Access Server
(Windows NT Server)
Remote Client 1
192.1.1.2
ISDN
192.1.1.1