Filter
Top Products
Network settings
7
IC-206 7-5
*1: Necessary if notification of the URL is to be sent by e-mail.
*2: Can also be obtained automatically from the DHCP server.
*3: Set the IP address to “0.0.0.0” if there is no usable SMTP server on the
network.
*4: The setting must be specified in order to use direct faxing. For details on
direct faxing, refer to the User’s Guide for fax kit FK-506.
*5: The setting must be specified in order to use Internet faxing. For details
on Internet faxing, refer to the User’s Guide for fax kit FK-506.
*6: Necessary in order to use POP Before SMTP.
*7: Necessary in order to use POP Before SMTP and if notification of the URL
is to be sent by e-mail.
List of LDAP settings
Specify these settings when using an LDAP (Lightweight Directory Access
Protocol) server.
Parameter Description Settings
Machine
control
panel
Page-
Scope Web
Connec-
tion
o: Can be set; -: Cannot
be set
LDAP SERVER AD-
DRESS
Specify the IP address or host name
for the LDAP server. Consult with the
network administrator.
oo
LDAP PORT NO. Specify the port number (between 1
and 65535) used for communicating
with the LDAP server. Consult with the
network administrator.
oo
SSL SETTING Select whether or not SSL is used to
encode the transmission data.
oo
SEARCH BASE Specify where to start the search in the
name space of the LDAP server. Con-
sult with the network administrator.
oo
Attribute for Operation
Panel
Specify the search attributes when us-
ing the control panel to search for des-
tinations on the LDAP server. Consult
with the network administrator.
oo
Attribute for Web tool Specify the search attributes when us-
ing PageScope Web Connection to
search for destinations on the LDAP
server. Consult with the network ad-
ministrator.
- o