Filter
Top Products
Performing a Scan to Server (FTP) operation
10
IC-206 10-7
5 Press the [Start] key.
6 The “BOOK SCAN” menu appears. Press the [,] or [+] key until “AUTO
DETECTION” is selected, and then press the [OK] key.
– The remainder of the procedure differs depending on whether “AU-
TO DETECTION” or “MANUAL” was selected.
!
Detail
Only FTP servers registered as speed dial numbers can be specified. FTP
server addresses can be registered as speed dial number by using Pag-
eScope Web Connection. Refer to “Registering speed dial destinations
(FTP servers)” on page 8-14.
A notification of the FTP server address where the data was uploaded
can be sent to up to 10 specified recipients. When registering the speed
dial destination with PageScope Web Connection, select “E-mail Notifi-
cation”. Refer to “Registering speed dial destinations (FTP servers)” on
page 8-14.