Filter
Top Products
7
Network settings
7-16 IC-206
Specifying the LPD setting
1 In the “NETWORK SETTING” menu, press the [,] or [+] key until “LPD
SETTING” is selected, and then press the [OK] key.
2 Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
– Whether “DISABLE” or “ENABLE” is selected, the message “AC-
CEPTED” appears, and then the “NETWORK SETTING” menu ap-
pears again.