Filter
Top Products
8
Registering destinations
8-4 IC-206
5 Select “MANUAL SETTING” or “LDAP SEARCH”, and then press the
[OK] key.
– If “MANUAL SETTING” was selected, continue with step 6.
– If “LDAP SEARCH” was selected, continue with step 9.
6 If “MANUAL SETTING” was selected, type in the name of the destina-
tion, and then press the [OK] key.
7 Type in the e-mail address of the recipient.
– When the destination address is entered, “OTHER SETTING=,”
appears. The transmission size and resolution for sending Internet
faxes can be specified. These settings are applied when a transmis-
sion is specified using the procedure for Internet fax transmissions.
The settings are not applied when a transmission is specified using
the procedure for Scan to E-mail transmissions. For details on the
Scan to E-mail operation, refer to “Performing a Scan to E-mail op-
eration” on page 9-1.
For details on Internet faxing, refer to the User’s Guide for fax kit
FK-506.