Filter
Top Products
Network settings
7
IC-206 7-23
Specifying the SMTP server address
1 In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “SMTP
SERVER ADDR.” is selected, and then press the [OK] key.
2 Type in the IP address or host name for the SMTP server. Press the
[OK] key.
– The host name can contain a maximum of 64 characters.
– To specify a host name for the SMTP server, the DNS setting must
be specified.
– For the IP address or host name of the SMTP server, consult with
the network administrator.
3 Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 1”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.