Filter
Top Products
Using PageScope Web Connection
11
IC-206 11-67
2
Reminder
To change the settings on the Network tab, click the [Apply] button, and
then, after “Updated Successful” appears, click the [Reset] button on the
page that appears after clicking “NIC and Printer Controller Reset” in the
menu under “Maintenance” on the System tab; otherwise, the changes
to the settings will not be applied.
After changing the settings for parameters marked with an asterisk (*),
turn this machine off, then on again.
The NetWare information that can be specified differs as shown below, de-
pending on the emulation mode and service mode settings selected for Net-
Ware.
Preferred NDS
Tree
Type in the preferred NDS tree name. (maximum 63 characters, excluding
/ \ ; : , * [ ] < > | + = ? and .)
Print Queue Scan
Rate(*)
Specify the interval for scanning the print queue. (Range: 1 to 65535 sec-
onds)
Mode(*) Select either “PServer” or “Nprinter/Rprinter” as the operating mode for
the print server.
Printer Number Type in the Nprinter/Rprinter printer number. (Range: 0 to 254)
Connection Mode Specify the NetWare emulation mode. (“Directory Services (NDS)”, “Bind-
ery” and “Directory Services/Bindery”)
Item Description
Service mode Nprinter PServer
Emulation mode NDS Bindery NDS Bindery
NetWare Configuration Enable NetWare (Select the
check box.)
Enable NetWare (Select the
check box.)
Frame Type AutoDetect (Select the frame
type according to the network
environment.)
AutoDetect (Select the frame
type according to the network
environment.)
Print Server Name Print server name specified on
the NetWare server
Print server name specified on
the NetWare server
NDS Context Name Name of the
context that
connects to
PServer
Not necessary
to specify
Name of the
context that
connects to
PServer
Not necessary
to specify
Print Server Password Specify only when setting from
the NetWare server.
Specify only when setting from
the NetWare server.
Password Retype
Preferred File Server Not necessary
to specify
Name of the
file server that
connects to
PServer
Not necessary
to specify
Name of the
file server that
connects to
PServer