Filter
Top Products
Network settings
7
IC-206 7-27
Specifying the POP before SMTP setting
1 In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “POP
BEFORE SMTP” is selected, and then press the [OK] key.
2 Press the [,] or [+] key until “OFF” or “ON” is selected, and then press
the [OK] key.
– If “OFF” is selected, the message “ACCEPTED” appears, and then
the “E-MAIL SETTING 1” menu appears again.
– If “ON” is selected, specify the length of time (in seconds) for POP
before SMTP. Specify the number of seconds, and then press the
[OK] key. The message “ACCEPTED” appears, and then the “E-
MAIL SETTING 1” menu appears again.
– The period can be set between 0 and 60 seconds.
Specifying the E-MAIL MODE settings
% In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “E-MAIL
MODE” is selected, and then press the [OK] key.