Filter
Top Products
Performing a Scan to E-mail operation
9
IC-206 9-3
4 Press the [Start] key.
Scanning and transmission begins.
2
Note
E-mail addresses specified after the [Scan] key is pressed are set as
Scan to E-mail recipients.
Up to 64 characters can be entered.
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission
result report is printed.
To cancel a queued transmission of scan data, press the [Function] key,
and then select “CANCEL RESERV.”. For details, refer to the User’s
Guide for fax kit FK-506.