Filter
Top Products
Performing a Scan to E-mail operation
9
IC-206 9-25
– If “MANUAL” is selected, a screen appears, allowing you to adjust
the density. Press the [*] or [)] key to adjust the density. Adjusting
the setting to the left reduces the density (lightens the image). Ad-
justing the setting to the right increases the density (darkens the im-
age).
When the [OK] key is pressed after the density setting is adjusted, the
message “ACCEPTED” appears, and then the Scan mode screen ap-
pears again with the adjusted density setting indicated.
2
Note
The manufacturer’s default setting is “AUTO”.