Filter
Top Products
Performing a Scan to Server (FTP) operation
10
IC-206 10-3
3 Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
– When the destination address is entered, “OTHER SETTING=,”
appears. To change transmission settings for the file format and the
compression encoding method, press the [,] key. The “SCAN
OTHER SETTING” menu appears. For details on changing the
transmission settings, refer to “Changing the transmission settings”
on page 9-10.
– Specify a speed dial number between 241 and 250.
– If nothing is registered with the specified speed dial number, an er-
ror message appears. Enter the correct speed dial number.
– If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.
4 Press the [OK] key.
The destination appears.
5 Press the [Start] key.