Filter
Top Products
Network settings
7
IC-206 7-13
2
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the DNS settings
1 In the “NETWORK SETTING” menu, press the [,] or [+] key until “DNS
CONFIG.” is selected, and then press the [OK] key.
2 Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
– If “DISABLE” is selected, the message “ACCEPTED” appears, and
then the “NETWORK SETTING” menu appears again.
– If “ENABLE” was selected, a screen appears, allowing you to spec-
ify the IP address of the DNS server. Continue with step 3.
3 Use the keypad to type in the IP address of the DNS server.
– For the IP address of the DNS server, consult with the network ad-
ministrator.