Filter
Top Products
7
Network settings
7-10 IC-206
2 Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.
3 Type in the administrator access code, and then press the [OK] key.
– The manufacturer’s default setting is “000000”.
– If the number was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4 Press the [,] or [+] key until “NETWORK SETTING” is selected, and
then press the [OK] key.
– If fax kit FK-506 is installed