Filter
Top Products
Just in case …
What you see on the
LCD
What it means/What to do
Please Supply Paper The paper cassette or bypass tray is out of
paper. Supply paper to the cassette and/or the
bypass tray.
Please Wait Your fax machine’s printer is either warming up
or busy. Please wait until the fax is finished
printing and then re-try your command or opera-
tion.
Polling In Use You tried to store the polling document in your
fax machine, where one already had been
stored. Wait for the fax to complete the regular
polling operation or delete the stored document,
then try again.
Printer In Use The command you’re trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
Protect Doc. Stored A received document was in your fax’s memory
when you tried to turn off the security reception
passcode. Print the received document from your
fax’s memory, then retry the desired operation.
Ration must be 100% You cannot set the magnification ratio in
Negative/Positive copy or Ultra copy mode.
Set the magnification ratio to 100 % to use the
Negative/Positive copy or Ultra copy mode.
REPLACE DRUM SOON Your drum will need to be replaced soon.
Please contact your authorised Konica dealer to
purchase a new drum cartridge if you don’t
already have one.
REPLACE DRUM UNIT Your drum cartridge doesn’t work.
PRINTER NOT USABLE Your machine cannot print until it is replaced
with a new drum cartridge.
Replace it.
Scanner In Use The command you’re trying to enter requires the
use of the scanner, which is already in use. Wait
for the fax to complete the scan, then re-try the
desired command.
What you see on the
LCD
What it means/What to do
SecurityRx is Off You tried to turn the security reception
ON
using
a Soft key which is assigned to set the security
reception to
ON
or
OFF
, but security reception
setting has not set to on.
To turn on or off the security reception using a
Soft key, first set the security reception setting to
on. (See pages 3.49–3.50.)
Select Paper Size You tried to make a copy in the following condi-
tions:
•Paper size selection is set to “Auto”.
•The bypass tray has the paper other than A4,
A5 or F4.
•Paper cassette(s) runs out of paper.
Press
PAPER SIZE
to select your desired paper.
Sub-address In Use You tried to enter a sub-address identical to one
already being used in another F-Code box. Enter
a different sub-address.
TONER ALMOST EMPTY Your machine is almost out of toner.
Please contact your authorised Konica dealer
soon to purchase a new toner cartridge if you
don’t already have one.
TONER EMPTY Your toner cartridge is empty.
PRINTER NOT USABLE Replace the toner cartridge. Your machine cannot
print until it is replaced with a new toner car-
tridge.
Too Many Characters You attempted to enter too many numbers or
other characters in the current operation.
Press
CANCEL
to delete the extra characters, then
try again. You may wish to review the operation’s
appropriate instructions.
Too Many Locations You tried to enter too many numbers for a
broadcast. You can enter up to 200 autodialer
number and up to 30 numbers entered through
the numeric keypad.
Press
CANCEL
to delete the extra numbers and
then try again.
5.8