Filter
Top Products
2.13
Basic operation
Stacking multiple copies
1
Press
COPY
/
FAX
to change to Copy mode.
2
Press
SORT
to turn the sort setting off.
Note: The default setting for sorting is On. To change the default setting,
see page 4.7.
3
Place your original document in
ADF
face up, or on the platen glass face
down just as you would to send a fax.
4
Enter the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
• Select document type and adjust image contrast
• Set copy reduction or enlargement ratio
Note: For details about each items, see “Making copy settings,” pages
2.15–2.16.
7
Press
START
.
Note: To stop the copying, press
STOP
.
Sorting multiple copies (using ADF)
Note: You cannot use the platen glass for sorting multiple copies.
1
Press
COPY
/
FAX
to change to Copy mode.
2
Make sure the
LED
on
SORT
glows, which means the sort setting is turned on.
Note: If the LED does not glow, press
SORT
to turn it on.
3
Place your original document in
ADF
face up, just as you would to send a fax.
4
Set the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
• Select document type and adjust image contrast
• Set copy reduction ratio
Note: For details about each items, see “Making the copy settings,” page 2.15.
7
Press
START
.
Note: To stop the copying, press
STOP
.
Enlarged or reduced copies
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the platen glass;
it is not available for copying using the
ADF
.
1
Press
COPY
/
FAX
to change to Copy mode.
2
Place your original document in
ADF
face up, or on the platen glass face
down just as you would send a fax.
Note: If you want to enlarged copy, use the platen glass.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
Choose an enlargement or reduction ratio using or of the cursor key.
You can reduce to 86%, 81%, 70% or 50 % of the original size
—OR—
You can enlarge to 115%, 122%, 141% or 200 %
—OR—
Press
ZOOM
to turn the
ZOOM
light on, and adjust the ratio at 1% steps using
or of the cursor key. You can enter the ratio between 50% and 200%.
—OR—
Directly enter any percentage between 50 % and 200 % by following proce-
dure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
141%: A5
→
A4
122%: A5
→
B5
JIS
115%: B5
JIS
→
A4
86%: A4
→
B5
JIS
81%: B5
JIS
→
A5
70%: A4
→
A5