Filter
Top Products
2.18
Basic operation
Your fax machine can also be used as a phone, if a telephone is connected to your fax
machine. The following is a brief look at the machine’s telephone features.
Dialing a telephone number
1
Pick up the telephone’s handset which is connected to your fax machine.
You will hear a dial tone.
2
Dial the number by the using numeric keypad.
— or —
Press the one-touch key. (See “One-touch phone dialing,” on page 3.4.)
— or —
Press
SPEED DIAL
/
TEL INDEX
once, then press the three digit speed-dial num-
ber. (See “Phoning via speed-dial,” on page 3.6.)
— or —
Press
SPEED DIAL
/
TEL INDEX
twice, then search the name you want to call
using the cursor key, then press
START
. (See “Telephone Index dialing,” page
3.8.)
3
When the other person answers, begin speaking.
On-hook dialing
Because your machine has a monitor speaker, you can dial without picking up the
handset.
1
Press
MONITOR
/
CALL
. You’ll hear a dial tone (unless you have set your speaker
volume to Off; see page 1.8), and the
LCD
shows:
2
Dial the number you want. Use either the numeric keypad, a one-touch key, a
speed-dial number or telephone index to dial.
Important: Your machine’s monitor speaker is not a speaker phone. If a person
answers the call, pick up the telephone’s handset to speak.
Note: If the call fails, press
MONITOR
/
CALL
to hang up.
Redial
Note: To use
REDIAL
/
PAUSE
key, you should assign it to a Soft key in advance. (See
page 3.16.)
1
Lift the telephone’s handset which is connected directly to your fax machine
to get a dial tone.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can remember the latest 10 dial numbers. Press or until
the dial number you want to redial appears.
4
Press
START
.
When the other person answers, use the telephone to speak to that person.
Changing the dialing type
If, with your machine set for “pulse” dialing, you must enter tones (“
DTMF
”) during a
call, press
DIALING OPTIONS
once (the “–!” symbol will be shown on the
LCD
). Your
machine now will “tone” dial all subsequent numbers.
Note: To use
DIALING OPTIONS
key, you should assign it to a Soft key in advance.
(See page 3.16.)
Note: Using this key enables tone transmission from the numeric keypad after the
call is connected. When you hang up the call, your machine will return to
“pulse” dialing for the next call.
View Redial History
0:1234567890
** Tel Mode **
_
Using your fax machine as a phone