Filter
Top Products
3.10 Paper Handling
3-81
3.10.9 Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper type for the printer.
Eight custom user settings may be registered. After having been set, any of these may be
called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see Setting the Paper Weight on page 3-82,
and Setting the Duplex Path on page 3-83) after selecting the paper type to be customized as
follows. For how to reset the customized settings, see section 3.10.10 Resetting the Custom
Paper Type on page 3-84.
1
Press the MENU key.
2
Press the U or V key repeatedly until Paper Handling > appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >Type Adjust > appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Press the U or V key to display the desired paper type. The display changes as
shown below.
Custom 1 (to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
7
When the paper type to be customized is displayed, press the ENTER key.
Paper Handling >
>Type Adjust >
Custom 1
>Type Adjust
? Custom 1