Filter
Top Products
3.10 Paper Handling
3-83
Setting the Duplex Path
If the optional duplexer is installed on the printer, you can set whether or not to enable
duplex printing as follows. The default setting is Enable.
1
Display the custom paper type (see section 3.10.9 Creating Custom Paper Type on
page 3-81) and press the Z key.
2
Press the U or V key repeatedly until >>Duplex path appears.
3
Press the ENTER key. A blinking question mark (?) appears.
4
Select Enable or Disable using the U or V key. For details of the default setting
for each paper type, see Chapter 2 Handling Paper, section 2.5 Paper Type on page
2-21.
5
Press the ENTER key.
6
Press the MENU key. The display returns to Ready.
The custom paper type setting is completed.
To use this function, the optional duplexer must be installed on the printer.
Note
>>Duplex path
Enable
>>Duplex path
? Enable