Filter
Top Products
3.13 Other Modes
3-90
6
Press the U or V key. The display cycles through the available selection in the
following order:
English
Francais
Deutsch
Italiano
Nederlands
Español
Português
7
Press the ENTER key.
8
Press the MENU key. The display returns to
Ready
.
3.13.2 Automatic Form Feed Timeout Setting
If the printer receives no data for a certain period, it will time out and release the current
interface. It prints whatever data it has in its buffer and feeds out the page. The default form
feed timeout time is 30 seconds. You can adjust the time-out time as follows:
1
Press the MENU key.
2
Press the U or V key repeatedly until Others > appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >Form Feed Time Out appears.
5
To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
6
Press the U or V key to increase or decrease the value at the blinking cursor and set
the desired time. The timeout time can be between 0 and 495 seconds, in 5-second
increments. Use the Z and Y keys to move the cursor right and left.
7
When the desired timeout time is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
Others >
>Form Feed
Time Out 030sec.
>Form Feed
Time Out 030
sec.