Filter
Top Products
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 56
7: Interfaces
This chapter describes the Interfaces tab including information about the pages for configuring
network, serial port, KVM Console, Keyboard/Mouse, Video, and Virtual Media settings. It contains
the following sections:
Network Settings
Serial Port Settings
KVM Console Settings
Keyboard/Mouse
Video
Virtual Media
User Interface Settings
Network Settings
The first link on the Interfaces tab is Network Settings. Do not forget that changing the settings
while connected to the network can result in dropping the connection. This occurs when you click
Save. Ensure that your new settings are correct when making changes from a remote site before
you click Save.
In Network Settings, there are four configuration areas:
Network Basic Settings—Sets auto IP configuration, host name, IP address, subnet mask,
gateway address, and primary and secondary DNS server addresses.
IPv6 Settings—Enables IPv6.
LAN Interface Settings—Sets LAN interface speed and duplex mode.
Network Miscellaneous Settings—Enables ports, Telnet/SSH access, proxy hose and port,
and bandwidth limit.
To configure network settings, perform the following steps.
1. Click Interfaces > Network. Figure 7-1 shows the page that displays.
Note: A small green square to the right of a field name indicates that the current value is
the default.