Lantronix SLSLP400PS201 Switch User Manual


 
9: Services
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 90
Event Log Assignments
3. Do one of the following:
a. Click Save to save settings.
b. Click Reset to Defaults to restore system defaults.
c. Click Reset to restore original settings.
SNMP
The Spider device has an internal SNMP agent that has various objects accessible in its MIB. It
also can generate traps based on events. The Spider device permits enabling or disabling the
SNMP agent, input read and write communities, location information, contact information, and
viewing the MIB.
To configure SNMP settings, perform the following steps.
1. Click Services > SNMP. The SNMP Settings page displays.
SMTP Logging enabled With this option, the Spider device is able to send emails to an address given
by the email address. These emails contain the same description strings as
the internal log file and the mail subject contains the event class. To use this
log destination, specify an SMTP Server, the Receiver Email Address, and
Sender Email Address. Enter the mail server and SMTP port as
<serverip>:<port>.
SNMP Logging Enabled If selected, the Spider device sends an SNMP trap to a specified destination
IP address every time a log event occurs. Configure the Destination IP and
Community. View the SNMP MIB implemented in the Spider device by
clicking on the Spider device SNMP MIB link.
Field Description
Event Log Assignments Select the event classes for monitoring, local logging, and exportation.
Field Description