Lantronix SLSLP400PS201 Switch User Manual


 
7: Interfaces
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 64
Mouse Hotkey
KVM Console Virtual Keys
3. Do one of the following:
a. Click Save to save settings.
b. Click Reset to Defaults to restore system defaults.
c. Click Reset to restore original settings.
Start in Exclusive
Access Mode
Upon any subsequent launch of the Remote Console applet by the selected
user, terminates any other users’ Remote Console windows and locks out
any other users trying to access the Remote Console window. This may be
changed from within the Remote Console window to allow shared access, if
the user has appropriate permission.
Field Description
Hotkey (Help) When the Remote Console window is open, a key code that is not captured
by the client system is needed for certain mouse functions. The default is
Alt+F12. Change the key code if necessary.
Full-screen Hotkey Pressing Ctrl+F10 will display the KVM console in Full-screen mode while
maintaining the same aspect ratio. Press Ctrl+F10 again to return to regular
screen mode. The default is Ctrl+F10. Change the key code if necessary.
Field Description
Key Definition (Help) Button keys allow simulating keystrokes at the remote system that cannot be
generated from the client keyboard. A flexible syntax allows for combinations
of keys being clicked in combination or in sequence, with optional pauses
and an optional confirmation-before-sending dialog box.
One key is predefined, for Ctrl+Alt+Delete (with confirmation.) The syntax to
define a new Button Key is as follows:
<keycode>[+|-|>[*]<keycode>]*
Keycode is the key to send. Multiple key codes are concatenated with a + or
a - sign. The + sign builds key combinations, all keys will be clicked until a -
sign or the end of the combination is encountered. All clicked keys will be
released in reversed sequence. The - sign builds single, separate key clicks
and key releases.
Note: For a list of keys and further explanation, click the Help link at the top
of the Key Definition column.
Name Enter the name to appear on the button in the Remote Console window. Up
to nine Button Keys may be defined for each user.
Field Description