Lantronix SLSLP400PS201 Switch User Manual


 
7: Interfaces
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 57
Figure 7-1 Spider Network Settings Web Page
2. Modify the following fields.
Network Basic Settings
Field Description
IP auto configuration Select DHCP or BOOTP to fetch network settings from the appropriate type
of server. Select NONE for a fixed IP address.
Host name DHCP servers can register a name for this Spider device to assist in finding
it, or you can configure it wi
th a short host name or a fully qualified
domain name.
IP address If you are using a fixed IP address, enter it in the usual dot notation.
Subnet Mask If you are using a fixed IP address, enter the subnet mask of the local
network.
Gateway IP address
(optional)
If the Spider device is to be accessible from outside the local subnet, enter
the IP address of the router providing access.
Primary DNS Server IP
Address (optional)
For name resolution, enter the IP address of the primary Domain Name
Server. This is optional, but needed if names rather than static IP addresses
are used for certain Spider device functions requiring network connections.