Filter
Top Products
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Specify the unit of measure.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3–8.5 inches
76–215.9 mm
Set the width for portrait orientation.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the U.S. factory default setting. You can increase the
width in 0.01‑inch increments.
• 215.9 mm is the international factory default setting. You can
increase the width in 1‑mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the height for portrait orientation.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the U.S. factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only in network printers or printers connected
to print servers.
Network [x] Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only when there is more than one network
option installed and only in network printers or printers connected to print
servers.
Understanding the printer menus 136