Lexmark CX510DE Printer User Manual


 
preparing to set up the printer on
an Ethernet network 40
print irregularities 292
print job
canceling, from computer 72
print quality
cleaning the scanner glass 215
replacing a developer unit 233
replacing imaging kit 223
replacing the waste toner
bottle 220
print quality troubleshooting
blank pages 295
characters have jagged edges 287
clipped pages or images 287
gray background on prints 288
horizontal voids appear on
prints 289
print irregularities 292
print is too dark 293
print is too light 294
printer is printing solid black
pages 296
repeating print defects 297
shadow images appear on
prints 297
skewed print 298
streaked horizontal lines appear
on prints 299
streaked vertical lines appear on
prints 300
toner fog or background shading
appears on prints 301
toner rubs off 302
toner specks appear on prints 302
transparency print quality is
poor 303
uneven print density 303
vertical voids appear on
prints 303
Print Settings menu 186
print troubleshooting
error reading flash drive 281
held jobs do not print 280
incorrect characters print 281
incorrect margins on prints 290
jammed pages are not
reprinted 278
job prints from wrong tray 282
job prints on wrong paper 282
jobs do not print 284
Large jobs do not collate 282
multiplelanguage PDF files do not
print 283
paper curl 291
paper frequently jams 278
print job takes longer than
expected 285
printing slows down 283
tray linking does not work 286
unexpected page breaks
occur 286
printer
configurations 11
minimum clearances 10
models 11
moving 10, 239
selecting a location 10
shipping 240
printer control panel
factory defaults, restoring 243
indicator light 16
parts 14
Sleep button light 16
using 14
printer control panel, virtual
display
using the Embedded Web
Server 241
Printer had to restart. Last job may
be incomplete. 268
printer hard disk
disposing of 210
encrypting 212
wiping 212
printer hard disk encryption 212
printer hard disk memory
erasing 212
printer information
where to find 9
printer IP address
finding 20
printer is printing blank pages 295
printer message
[x]page jam, open front door to
clear duplex [23y.xx] 254
printer messages
[Color] cartridge low [88.xy] 261
[Color] cartridge nearly low
[88.xy] 261
[Color] cartridge very low, [x]
estimated pages remain
[88.xy] 261
[Type] imaging kit low [84.xy] 273
[Type] imaging kit nearly low
[84.xy] 273
[Type] imaging kit very low, [x]
estimated pages remain
[84.xy] 273
[x]page jam, clear manual feeder
[251.xx] 256
[x]page jam, clear multipurpose
feeder [250.xx] 257
[x]page jam, clear standard bin
[203.xx] 247
[x]page jam, open automatic
feeder top cover [28y.xx] 259
[x]page jam, open front door
[20y.xx] 253
[x]page jam, open front door to
clear fuser [20y.xx] 250
[x]page jam, open tray [x]
[24y.xx] 255
Adjusting color 260
Change [paper source] to [custom
string] 260
Change [paper source] to [custom
type name] 260
Change [paper source] to [paper
type] [paper size] 260
Close door 260
Close flatbed cover and load
originals if restarting job
[2yy.xx] 261
Complex page, some data may not
have printed [39] 261
Configuration change, some held
jobs were not restored [57] 261
Defective flash detected [51] 262
Disk full [62] 262
Disk must be formatted for use in
this device 262
Error reading USB drive. Remove
USB. 262
Error reading USB hub. Remove
hub. 262
Fax partition inoperative. Contact
system administrator. 262
Fax server 'To Format' not set up.
Contact system
administrator. 262
Fax Station Name not set up.
Contact system
administrator. 263
Index 348