Filter
Top Products
Defective flash detected [51]
Try one or more of the following:
• Replace the defective flash memory card.
• From the printer control panel, touch Continue to ignore the message and continue printing.
• Cancel the current print job.
Disk full [62]
Try one or more of the following:
• From the printer control panel, touch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored in the printer hard disk.
• Install a printer hard disk with larger capacity.
Note: To install a printer hard disk, contact customer support at
http://support.lexmark.com or your service
representative.
Disk must be formatted for use in this device
From the printer control panel, touch Format disk to format the printer hard disk and clear the message.
Note: Formatting deletes all the files stored in the printer hard disk.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Fax partition inoperative. Contact system administrator.
Try one or more of the following:
• From the printer control panel, touch Continue to clear the message.
• Turn off the printer, and then turn it back on. If the message appears again, then contact your system support
person.
Fax server 'To Format' not set up. Contact system administrator.
Try one or more of the following:
• From the printer control panel, touch Continue to clear the message.
• Complete the Fax Server setup. If the message appears again, then contact your system support person.
Troubleshooting 262