Filter
Top Products
Use To
Contrast
0–5
Best for content
Specify the contrast of the output.
Note: “Best for content” is the factory default setting.
Mirror Image
Off
On
Create a mirror image of the original document.
Note: Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note: Off is the factory default setting.
Shadow Detail
‑4 to 4
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Adjust ADF Skew
Auto
Off
On
Correct the slight skew in the scanned image.
Note: Auto is the factory default setting.
Scan edge to edge
Off
On
Allow edge-to-edge scanning of the original document.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Temperature
‑4 to 4
Specify “warm” or “cool” outputs.
Notes:
• 0 is the factory default setting.
• "Cool” values generate a bluer output than the default while “warm” values
generate a redder output than the default.
Print Settings menu
Use To
Copies
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Color
Color
Black Only
Specify whether the printer captures and transmits content in color or in black and white.
Note: Color is the factory default setting.
Understanding the printer menus 186