Filter
Top Products
119
Troubleshooting
Power Off
Check the power cord and power source. If the
power light remains
Off
, contact your service
representative.
Power
Ready
Paper Out
Panel Loc
k
On
Off
Blinking
Blinking
The paper select lever has been changed while paper
was loaded. Move the paper select lever back to
correct position and press
Start/Stop
.
Note:
Make sure paper is parked or unloaded
before changing the position of the paper select
lever.
Power
Ready
Paper Out
Panel Loc
k
On
Blinking
Blinking
Blinking
1 Open and close the operator panel.
2 If you are attempting to perform a button
power On sequence, verify you are holding
the correct button.
3 Power printer Off and back On with no
buttons held down.
4 If error continues, call for service.
Power
Ready
Paper Out
Tractor 2
On
Blinking
Blinking
Blinking
Insure Tractor 2 option is install correctly. For
instructions, see the Tractor 2 manual that came with
your option.
Printer status (continued)
Operator panel
lights/status
Action required