Filter
Top Products
135
Troubleshooting
Paper does not feed from
the Auto Sheet Feeder.
The Auto Sheet Feeder
locking lever is in the
front position.
Set the Auto Sheet Feeder
locking lever to the back
position.
The paper select lever is
in the tractor feed
position.
Set the paper select lever to
the cut sheet
position.
The optional Auto Sheet
Feeder is not set to
On
in
Setup mode.
Enter Setup mode and set the
option to
On
. See “Entering
Setup mode” on page 90 for
more information.
Too many sheets are in
the paper bin.
• Remove the extra sheets.
• Ensure that the stack of
paper is not more than 150
sheets (64 g/m
2
). For larger
or thicker paper, use fewer
sheets.
The weight of the paper
is too great.
Remove all paper from the
paper bin and install paper
that has a lower weight. See
the optional Auto Sheet
Feeder manual for
recommended paper weights.
Paper sheets seem to
hold together at the
bottom edge.
Remove all paper from the
paper bin and fan the top and
bottom edges with your
thumb. Then place the paper
in the paper bin.
Dirty feed rollers. For help, see “Cleaning the
Auto Sheet Feeder rollers” on
page 143.
Printer problems (continued)
Problem Probable cause Action