Filter
Top Products
126
Troubleshooting
7
To set NLQ, select the best alignment bars from
the 01 - 07 printout.
The current value is the number printed below
the bars.
Press
Micro
↑
or
Micro
↓
to select the best
alignment by number or keep the current
value.
After making your selection, the printer
prints a single row showing the current
alignment setting.
8
Press
Set TOF
to save your selections.
9
Close the Operator panel cover.
The printer returns to Ready.
Clearing paper jams
The following steps explain how to clear paper jams.
Cut form jams
1
Turn the printer
Off
.
2
Set the forms thickness lever to position 7.
3
Push the paper select lever down to the
continuous forms
position.
4
Gently pull out the sheet of paper from the
front of the printer.
5
Remove the ribbon access cover to clear any
torn pieces of paper.
6
Set the paper select lever to the cut forms
position.