Filter
Top Products
127
Troubleshooting
7
Set the forms thickness lever to the proper
setting for the type of paper you are using.
See “Setting the forms thickness lever” on
page 44.
Continuous forms jams
1
Turn the printer
Off
.
2
Detach any continuous forms already printed.
3
Set the forms thickness lever to position 7.
4
Tear the continuous forms off at the
perforation line before the forms enter the
printer.
5
If using the tractor in the push position, open
the front cover. (Skip this step if you are using
the optional Tractor 2 Feeder.)
6
Open the left and right tractor doors.
7
Lift the paper away from tractor pins.
8
Carefully pull out the paper.
9
Remove the ribbon access cover to clear any
torn paper.
10
Remove any torn perforation strips or bits of
paper from the paper path.