Filter
Top Products
122
Troubleshooting
Initialize printer to EU defaults
The standard defaults for Europe are:
•
Code page: 858
•
Character Set: 2
•
Form length: 12”
To change the defaults:
1
Make sure paper and the ribbon cartridge are
installed.
2
Turn the printer
Off
.
3
Open the ribbon access cover.
4
Move the printhead toward the operator panel
side of the printer until it stops.
5
Close the ribbon access cover.
6
Press and hold
Tear Off + Tractor
while you
turn the printer
On
.
7
Continue holding these buttons until the carrier
moves.
Note:
The operator panel lights blink
On
and
Off
several times.
Once the carrier moves, your settings have been reset
to factory defaults.