Filter
Top Products
123
Troubleshooting
Adjusting bidirectional alignment
Occasionally, you may want to adjust the character
alignment (also called
bidirectional alignment
) on your
printer. The following steps illustrate how to adjust the
alignment of the print wires.
Note:
Make sure continuous forms are loaded in
your printer.
1
Make sure the default macro is set to disabled.
For help, see “Entering Setup mode” on
page 90.
2
Turn the printer
Off
.
3
Open the Operator panel cover to access
layer 2.
4
Press and hold
Pitch
while turning
On
the
printer.