Filter
Top Products
30
Operator panel
Using the Load/Unload feature
Load/Unload
works only when the tractor unit is in the
push position. For information, see “Changing tractor
positions” on page 33.
Use the
Load/Unload
feature to unload continuous
forms from the printer while you print on either a cut
form or envelope. You can also use the feature to load
continuous forms into the printer when the paper path
is clear. For information, see “Loading continuous
forms” on pag e46.
Locking/unlocking the operator panel
To restrict the use of printer functions to just the
Start/Stop
,
FormFeed
,
Tear Off
, and
Load/Unload
buttons, you can lock the operator panel. When the
panel is locked, the padlock light comes
On
.
1
Turn the printer
Off
.
2
Press and hold
Load/Unload
and
Tractor
while
turning the printer
On
.
To unlock the operator panel, repeat steps 1 and 2.
Selecting Tractor mode
If you installed the optional Tractor 2 Feeder, you can
press
Tractor
to switch between the normal tractor
feeder and the Tractor 2 Feeder. The Tractor 2 light
comes
On
when the Tractor 2 Feeder is selected.
Note:
Before you switch tractor feeders, tear off
excess paper.