Filter
Top Products
27
Operator panel
Understanding the operator panel
lights
The following table describes the light patterns on the
operator panel.
Layer 1 operator panel lights
Light
Light
status
What it means
Power On
The printer is
On
.
Ready On
The printer is online and ready to
print.
Blinking The printer is receiving data.
Off
The printer is offline.
Tractor 2 On
Tractor 2 is activated. (The optional
Tractor 2 Feeder must be installed.)
Paper Out Off
Paper is loaded in the printer.
Blinking The printer is out of paper.
On
A printer error occurred.
Padlock On
The operator panel is disabled,
restricting the use of panel buttons
to
Start/Stop, FormFeed, Tear Off
and
Load/Unload
only. For more
information, see “Locking/unlocking
the operator panel” on pag e30.
Font On
You (or your software application)
selected one of the printer's resident
fonts.
Off
If all font lights are Off, then a
downloaded font is selected.
Font Lock On
Font Lock is active and prevents your
software application from changing
the font you selected on the
operator panel. For more
information, see “Selecting or
locking a font” on page 31.