Filter
Top Products
72
Loading paper
16
Open the operator panel cover to access layer 2.
17
Press
LineFeed, Micro
↑
, or
Micro
↓
to move
the paper to the Top-Of-Form.
18
Press
Set TOF
to set Top-Of-Form.
Top-Of-Form is not saved if the printer is turned
Off
or runs out of paper when using the pull
tractor.
19
Make sure the printer is online (Ready light is
On
solid).
If not, press
Start/Stop
until the Ready light is
On
solid.
Loading a cut form or envelope
Cut forms can be a single sheet, an envelope, or a
multiple-part form. They are placed one at a time into
the manual feeder.
Note:
If you have installed the optional Auto
Sheet Feeder or Tractor 2 Feeder, refer to
the documentation shipped with your
option for paper loading instructions.