Filter
Top Products
83
Loading paper
This illustration shows the position of the two
horizontal lines on either side of the metal platen bar.
Use these lines as your reference point when lining up
your Top-Of-Form. The bottom of a printed character
will be even with the horizontal lines.
8
Press
Set TOF
to set and save your Top-Of-
Form.
9
Close the operator panel cover.
10
To verify the new Top-Of-Form, press
Load/Unload
to
unload the continuous forms
and press
Load/Unload
again
to
reload the
forms.
The continuous forms load to the current
Top-Of-Form setting.
11
Press
Start/Stop
to set the printer online.
Note:
If Auto Tear Off is set to
On
or
One
Second
the paper advances to the Tear
Off position. A print job or pressing
Tear
Off
returns the paper to the current
Top-Of-Form.
Align paper with
horizontal lines on
metal platen bar
Ribbon
cartridge
Front
cover
Horizontal
line
Paper
Metal
platen