Filter
Top Products
77
Loading paper
10
Insert paper into the printer until the Paper Out
light stops blinking.
•
If Auto Cut Sheet Load is set to
On
, the
paper feeds automatically to the Top-Of-
Form.
•
If Auto Cut Sheet Load is set to
Off
, press
FormFeed
.
11
Make sure the printer is online (Ready light is
On
solid).
If it is not, press
Start/Stop
until the Ready
light is
On
solid.
Aligning the left margin
You can manually change the first print position at the
left margin. The first print position is indicated by the
[A
symbol. You can also set the left margin from your
software application.
Note:
Setting the left margin in your software
application, adds it to the left margin
setting on the printer. For example, if you
set the left margin at 1 inch on the
printer, and also have the left margin set
at 1 inch in your software application, the
printer begins printing 2 inches from the
left edge of the page.