Filter
Top Products
29
Operator panel
Advancing the paper
You can use the operator panel to advance the paper
when the printer is not printing.
•
Press
LineFeed
to advance the paper to the
next line.
•
Press
FormFeed
to advance the paper to
the Top-Of-Form on the next page or to
eject the cut form.
If you are at the Tear Off bar:
•
Press
LineFeed
to move the paper
incrementally.
•
Press
Tear Off
to move the paper to the
Top-Of-Form.
Using Tear Off
Tear Off
works only when the tractor unit is in the push
position.
Note:
For the Tear Off function to work
properly, you must set the correct page
length in the Setup menu or your
application software.
The Tear Off function advances the perforation of a
continuous form to the tear bar position. You can set
Tear Off
to move a continuous form automatically to
the Tear Off position (Auto Tear Off set to
On
or to
One
Second
), or you can move a continuous form manually
to the Tear Off position (Auto Tear Off set to
Off
). For
more information, see “Setting the Tear Off position”
on page 87.