Lexmark XM3100 Scanner User Manual


 
Use To
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when not resolved within the specified time period.
Note: Disabled is the factory default setting.
Print Recovery
Jam Recovery
On
Off
Auto
Specify whether the printer reprints jammed pages.
Notes:
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
Off sets the printer to never reprint jammed pages.
Print Recovery
Jam Assist
On
Off
Set the printer to automatically check for jammed paper.
Note: On is the factory default setting.
Print Recovery
Page Protect
Off
On
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
entire page prints.
Press Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer responds to a short press of the Sleep
button when the printer is idle.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer responds to a long press of the Sleep
button when the printer is idle.
Notes:
Do Nothing is the factory default setting.
Sleep or Hibernate sets the printer to operate at a lower
power configuration.
If the printer is in Sleep Mode, then the touch screen
appears off and the Sleep button turns amber in color.
Press and hold the Sleep button for 3 seconds or longer to
enter Hibernate mode.
Touch anywhere on the touch screen or press a button on
the printer control panel to exit Sleep Mode.
Understanding the printer menus 174