Lexmark XM3100 Scanner User Manual


 
Use To
PCL Emulation Settings
Point Size
1.00–1008.00
Change the point size for scalable typographic fonts.
Notes:
12 is the factory default setting.
Point size refers to the height of the characters in the font. One point
equals approximately 0.014 inch.
Point sizes can be increased or decreased in 0.25point increments.
PCL Emulation Settings
Pitch
0.08–100
Specify the font pitch for scalable monospaced fonts.
Notes:
10 is the factory default setting.
Pitch refers to the number of fixedspace characters per inch (cpi).
Pitch can be increased or decreased in 0.01cpi increments.
For nonscalable monospaced fonts, the pitch appears on the display but it
cannot be changed.
PCL Emulation Settings
Orientation
Portrait
Landscape
Specify the orientation of text and graphics on the page.
Notes:
Portrait is the factory default setting. Portrait prints text and graphics
parallel to the short edge of the page.
Landscape prints text and graphics parallel to the long edge of the page.
PCL Emulation Settings
Lines per Page
1–255
Specify the number of lines that print on each page.
Notes:
60 is the US factory default setting. 64 is the international default setting.
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the Paper Size
and Orientation you want before setting Lines per Page.
PCL Emulation Settings
A4 Width
198 mm
203 mm
Set the printer to print on A4size paper.
Notes:
“198 mm” is the factory default setting.
The 203mm setting sets the width of the page to allow printing of eighty
10pitch characters.
PCL Emulation Settings
Auto CR after LF
On
Off
Specify whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command.
Note: Off is the factory default setting.
PCL Emulation Settings
Auto LF after CR
On
Off
Specify whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
Understanding the printer menus 207