streaked horizontal lines appear
on prints 300
streaked vertical lines 301
toner fog or background
shading 304
toner rubs off 305
toner specks appear on prints 304
transparency print quality is
poor 300
uneven print density 305
white streaks 303
print troubleshooting
error reading flash drive 281
held jobs do not print 283
incorrect characters print 285
incorrect margins on prints 292
jammed pages are not
reprinted 280
job prints from wrong tray 285
job prints on wrong paper 285
jobs do not print 281
Large jobs do not collate 286
multiple‑language PDF files do not
print 280
paper curl 293
paper frequently jams 279
print job takes longer than
expected 284
tray linking does not work 286
unexpected page breaks
occur 287
printer
basic model 12
finishing features 81
fully configured 12
minimum clearances 11
moving 11, 233, 234
selecting a location 11
shipping 234
printer configurations 12
printer control panel 16
factory defaults, restoring 237
indicator light 16
Sleep button light 16
printer control panel, virtual
display
using the Embedded Web
Server 235
Printer had to restart. Last job may
be incomplete. 269
printer hard disk
disposing of 219
encrypting 221
installing 41
removing 44
wiping 220
printer hard disk encryption 221
printer hard disk memory
erasing 220
printer information
where to find 10
printer IP address
finding 22
printer is printing blank pages 288
printer messages
[x]-page jam, remove all pages
from the finisher’s accumulator.
Leave paper in bin. [45y.xx] 255
[x]-page jam, remove all pages
from the output bin. Leave paper
in bin. [45y.xx] 250
[x]‑page jam, clear manual feeder.
[25y.xx] 247
[x]‑page jam, clear standard bin.
[20y.xx] 241
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 241
[x]‑page jam, open front door.
[20y.xx] 243
[x]‑page jam, open rear door.
[20y.xx] 242
[x]‑page jam, open tray [x].
[24y.xx] 249
[x]‑page jam, remove tray 1 to
clear duplex. [23y.xx] 246
Cartridge low [88.xy] 259
Cartridge nearly low [88.xy] 260
Cartridge very low, [x] estimated
pages remain [88.xy] 260
Cartridge, imaging unit mismatch
[41.xy] 259
Change [paper source] to [custom
string] load [orientation] 260
Change [paper source] to [custom
type name] load
[orientation] 260
Change [paper source] to [paper
size] load [orientation] 260
Change [paper source] to [paper
type] [paper size] load
[orientation] 260
Check tray [x] connection 261
Close flatbed cover and load
originals if restarting job
[2yy.xx] 261
Close front door 261
Complex page, some data may not
have printed [39] 261
Configuration change, some held
jobs were not restored [57] 262
Defective flash detected [51] 262
Disk full 62 262
Disk must be formatted for use in
this device 262
Disk near full. Securely clearing
disk space. 262
Error reading USB drive. Remove
USB. 262
Error reading USB hub. Remove
hub. 262
Fax memory full 263
Fax partition inoperative. Contact
system administrator. 263
Fax server 'To Format' not set up.
Contact system
administrator. 263
Fax Station Name not set up.
Contact system
administrator. 263
Fax Station Number not set up.
Contact system
administrator. 263
Imaging unit low [84.xy] 263
Imaging unit nearly low
[84.xy] 263
Imaging unit very low, [x]
estimated pages remain
[84.xy] 263
Incompatible tray [x] [59] 264
Incorrect paper size, open [paper
source] [34] 264
Insufficient memory for Flash
Memory Defragment operation
[37] 264
Insufficient memory to collate job
[37] 264
Insufficient memory to support
Resource Save feature [35] 265
Insufficient memory, some Held
Jobs were deleted [37] 264
Insufficient memory, some held
jobs will not be restored
[37] 264
Index 345