Lexmark XM3100 Scanner User Manual


 
1
2
3
4
6
5
7
8
9
Jam access area Printer control panel message What to do
1 Automatic
document feeder
(ADF)
[x]page jam, open ADF to clear
jam. [28y.xx]
Remove all paper from the ADF tray, and then remove the
jammed paper.
2 Standard bin [x]page jam, clear standard
bin. [20y.xx]
Remove the jammed paper.
3 Front door [x]page jam, open front
door. [20y.xx]
Open the front door, then remove the toner cartridge and
imaging unit, and then the jammed paper.
4 Multipurpose
feeder
[x]page jam, clear manual
feeder. [25y.xx]
Remove all paper from the multipurpose feeder, and then
remove the jammed paper.
5 Tray 1 [x]page jam, remove tray 1 to
clear duplex. [23y.xx]
Pull out tray 1 completely, then push the front duplex flap
down, and then remove the jammed paper.
Note: You may need to open the rear door to clear
some 23y.xx paper jams.
6 Tray [x] [x]page jam, open tray
[x]. [24y.xx]
Pull the indicated tray out, and then remove the jammed
paper.
7 Rear door [x]page jam, open rear
door. [20y.xx]
Open the rear door, and then remove the jammed paper.
8 Finisher rear door [x]-page jam, remove all pages
from the finisher’s accumulator.
Leave paper in bin [45y.xx]
Open the finisher rear door, and then remove the
jammed paper.
Open the trap door, and then remove the jammed
paper.
9 Finisher output bin [x]-page jam, remove all pages
from the output bin. Leave paper
in bin [45y.xx]
Move the left tamper arm to the left and the right
tamper arm to the right, and then remove the jammed
paper from the finisher bin.
Open the finisher rear door and the trap door, and
then remove any jammed pages.
Clearing jams 240