Lexmark XM3100 Scanner User Manual


 
Use To
Factory Defaults
Do Not Restore
Restore Now
Return the printer settings to the factory default settings.
Notes:
Do Not Restore is the factory default setting. This keeps the
userdefined settings.
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored in
flash memory or on a printer hard disk are not affected.
Copy Settings menu
Use To
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is twosided (duplex) or onesided, and then
specify whether the copy should be twosided or onesided.
Notes:
1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Paper Saver
Off
2up Portrait
4up Portrait
2up Landscape
4up Landscape
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Understanding the printer menus 175