Lexmark XM3100 Scanner User Manual


 
Duplex Binding
Long Edge
Short Edge
Define binding for duplexed pages in relation to page orientation.
Notes:
Long Edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Paper Saver
Off
2Up
3Up
4Up
6Up
9Up
12Up
16Up
Specify that multiplepage images be printed on one side of a paper.
Notes:
Off is the factory default setting.
The number selected is the number of page images that will print per side.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiplepage images.
Notes:
Horizontal is the factory default setting.
Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiplepage document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Specify whether blank separator sheets are inserted.
Notes:
Off is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
“(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between
each set of printed pages, such as after all page 1's and after all page 2's.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank sheet between each page of the print job. This setting is
useful when printing transparencies or when inserting blank pages in a document .
Separator Sheet Source
Tray [x]
Manual Feeder
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
Blank Pages
Do Not Print
Print
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Understanding the printer menus 198