Magnetek Quattro DC Elevator Drive Computer Hardware User Manual


 
Quattro DC Parameters
Parameters
Parameter Introduction
This section describes the parameter menu
structure of the Magnetek Operator, how to
navigate this menu structure, and a detailed
description of each parameter.
Parameters are grouped under six major
menus:
ADJUST A0
CONFIGURE C0
UTILITY U0
FAULTS F0
DISPLAY 1 D0
DISPLAY 2 D0
When the SUB-MENU LED is off, the currently
selected menu is shown on the top line of the
Digital Operator display and the currently
selected sub-menu is shown on the bottom line
of the Digital Operator display.
Menus
Each menu has a number of sub-menus.
Following is a listing of the menus:
ADJUST A0
CONFIGURE C0
UTILITY U0
FAULTS F0
DISPLAY 1 D0
DISPLAY 2 D0
Display 1 D0
Adjust A0 Configure C0 Utility U0 Faults F0 Display 2 D0
Active
Faults F1
Fault
History F2
Elevator
Data D1
MS Power
Data D2
LS Power
Data D3
Elevator
Data D1
MS Power
Data D2
LS Power
Data D3
User
Switches C1
Logic Inputs
C2
Logic
Outputs C3
Analog
Outputs C4
Drive A1
S-Curves A2
MultiStep Ref
A3
Motor side
Power
Convert A4
Line side
Power
Convert A5
Motor
Params A6
Password
U1
Hidden
Items U2
Units U3
Ovrspeed
Test U4
Restore
Dflts U5
MS Drive
Info U6
LS Drive
Info U7
Hex Monitor
U8
RUN/FAULT
SUB MENU
DATA ENT
DISPLAY 1 D0
D1 ELEVATOR DAT
A
Menu/Sub-Menu Tree
26