Magnetek Quattro DC Elevator Drive Computer Hardware User Manual


  Open as PDF
of 126
 
Quattro DC Quick Parameter Reference
Sub
menu
Parameter Units Range Default
Site
Setting
A3 Multistep Ref A3 Submenu – See Multistep Ref A3 submenu on page 41.
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 1
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 2
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 3
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 4
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 5
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 6
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 7
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 8
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 9
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 10
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 11
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 12
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 13
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 14
m/sec -16.000 – +16.000 0.000
ft/min -3000.0 – +3000.0 0.0
A3 SPEED COMMAND 15
m/sec -16.000 – +16.000 0.000
A4 Motor Side Power Convert A4 Submenu – See Motor Side Power Convert on page 43.
A4 ARM RESISTANCE ohm 0.0001 – 2.9999 0.5000
A4 ARM INDUCTANCE mH 0.01 – 327.67 15.00
A4 MTR REV VLT LIM % 0.01 – 30.00 4.80
A4 If REG INT GAIN none 0.00 – 30.00 0.90
A4 If REG PROP GAIN none 0.00 – 16.38 6.07
A4 AUTO TUNE MOTOR none
− Start Autotune?
-
A4 GAIN SELECTION none
− manual
− autotune
MANUAL
A4 GAIN BANDWIDTH A rad/sec 100 – 2000 500
A4 GAIN BANDWIDTH F rad/sec 1 – 40 5
A4 PWM FREQUENCY kHz 2.5 – 16.0 6.0
A4 FAN OFF DELAY sec 0 – 999 180
A4 MAIN FAN CONTROL none
− auto
− temp
− off
− low
− medium
− high
TEMP
A4 UV-ALARM LEVEL % 80 – 99 90
A4 UV FAULT LEVEL % 50 – 99 80
A4 FLD CARRIER FRQ kHz 3 – 10 3
5
 previous next