Magnetek Quattro DC Elevator Drive Computer Hardware User Manual


 
Quattro DC Utility U0 Menu
Restore Motor Defaults
This function resets the parameters in the
MOTOR A6 sub-menu to the defaults. The
following shows how to restore the motor
defaults:
Press the enter key
Press the enter key again
If the esc key is pressed, instead the reset
action will be aborted
Restore Utility Defaults
This function resets the parameters in the
Utility U0 menu to the defaults. The following
shows how to restore the utility defaults:
Press the enter key
Press the enter key again
If the esc key is pressed, instead the reset
action will be aborted
MS DRIVE INFO
(Motor Side Drive Information)
Six different screens are included in this sub-
menu, each display an identification number.
MS TYPE Screen
Shows the type of drive the software is
installed in:
MS CODE VERSION
Shows the version of code located in the Motor
Side portion of the drive.
RUN/FAULT
SUB MENU
DATA ENT
PRESS ENTER TO
CONFIRM REQUEST
RUN/FAULT
SUB MENU
DATA ENT
DEFAULT RESTORED
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
NO ACTION TAKEN
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
MS TYPE
U6 STD. DC Drv.
RUN/FAULT
SUB MENU
DATA ENT
MS CODE VERSION
U6 A4420-DU0004
RUN/FAULT
SUB MENU
DATA ENT
RESTORE MOTOR
U5 DEFAULTS?
RUN/FAULT
SUB MENU
DATA ENT
PRESS ENTER TO
CONFIRM REQUEST
RUN/FAULT
SUB MENU
DATA ENT
DEFAULT RESTORED
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
NO ACTION TAKEN
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
RESTORE UTILITY
U5 DEF
A
ULTS?
73