Filter
Top Products
114
Appendix B, Matrox MXO2 Connectors
SDI A and SDI B Provide two simultaneous outputs of the
same HD-SDI or SD-SDI video, with up to eight channels of
embedded audio. You can output video with closed captioning
using the SDI outputs (see “Matrox 4VANC closed caption
capture and playback” on page 58). For each output, connect an
SDI video/audio cable to a video monitor, VTR, or other SDI
device. You can also perform 5.1 surround sound monitoring
through the SDI output by connecting to a third-party device,
such as an SDI audio de-embedder.
Component video (Y, Pb, Pr) Allows you to output HD or
SD video to an analog component device. Connect component
Y, Pb, Pr video cables to a video monitor, VTR, or other
component device.
¦NoteThe component output supports YUV and RGB
devices. To set the component output type, see
“Specifying your video output settings” on page 52.
Y/C (S-Video) Provides an output for SD video to an analog
S-Video device. Connect an S-Video cable to a video monitor,
VTR, or other S-Video device.
Composite video (CVBS) Allows you to output SD video to
an analog NTSC or PAL device. Connect a composite video
cable to a video monitor, VTR, or other NTSC or PAL device.
AES/EBU digital audio Allows you to output stereo digital
audio. Connect a coaxial BNC audio cable to a VTR, audio
mixer, speakers, or other audio device.
¦NoteNot available on MXO2 LE.
Analog audio (balanced) Allows you to output
balanced stereo analog audio. Connect XLR
cables to a VTR, audio mixer, speakers, or other
audio device.