Filter
Top Products
16
Chapter 3, Connecting External Devices to Matrox MXO2
Typical Matrox MXO2 connections
In the following typical connection examples, we’ve connected a monitor to view
the signal that will be recorded, and separate source and record decks. You may,
however, use the same deck as both your source and record device by making the
input and output connections to a single deck. For details on the Matrox MXO2
connectors, see Appendix B, “Matrox MXO2 Connectors.”
Analog component video connections
In this illustration, we’re using analog component connectors for video, XLR
connectors for audio, and an HDMI connector for video monitoring. The video is
genlocked using MXO2’s internal genlock.
Source
(Deck 1)
Recorder
(Deck 2)
HDMI
monitor
MXO2 Outputs
MXO2 Inputs